220V Electric Engraving Pen Engraver Tool Carving Pen Plotter Machine Chisel Tips Wood Metal Glass Stone Lettering Tools
40W 80W Laser Module Optical Power 10W Laser Engraver, Air Assist & Laser Shield Diode CNC Cutter & Laser Engraving Machine
Description
SPECIFICATIONS
Application: lettering
Brand Name: NONE
Certification: NONE
Choice: yes
Drill Type: Other
High-concerned chemical: None
Model Number: EU Carving Pen
Origin: Mainland China
Rated Voltage: 220V
Use: Home DIY
is_customized: Yes
semi_Choice: yes
Features:
*Works great on metals, china, glass, plastic and other hard material.
*Using the typical alternating current of frequency cycle, the equipment generates high-speed vibration to drive the high-hardness metal bit to engrave.
*The speed can be adjusted to meet the requirements of different materials.
*Pen design, hold and engrave just like writing, easy to .
*Mechanical principle: The forced vibration (up and down vibration) is generated by the periodic characteristics of AC frequency to drive the pen tip to work, so there will be certain tolerable noise during the work.
*It can engrave any permanent patterns and characters, with a large concave depth, which can reach up to 1mm according to the material hardness.
*It is widely used for carving on the for of almost all materials such as metal, jade, glass, plastic, marble, wooden, etc.
Specifications:
Product name: Electric Engraver
Material: Metal + Rubber
Color: Black
Plug: European standard
Volt/Power: 220V 40W
Supply Voltage: 220V
Max. Power: 40W
Output Current: 0.1A
Pen Bit: 3mm
Engraving Depth: 0.1-0.5mm
Repeat Engraving Depth: 0.3-0.8mm
Suitable for: Chiseling Tips on Metal Wooden Glass Plastic Stone
Quantity: 1 Pc
Instructions:
1. When in use, hold the body with your hand, tilt it at an angle (about 45 degrees) like writing with a pen, and place your hand on the table, do not press down hard when writing, the writing speed is slightly slower than usual. Move the carving on the real object.
2. Leave a trace where it crosses.
3. According to different materials, adjust the gears reasonably.
4. Master its performance through repeated engraving to meet the font size and depth requirements of different materials.
Caution:
1. Continuous work should not exceed 20 minutes to avoid damage to the coil. Intermittent use can ensure the life of the body.
2. When the housing is heated, it should be used after cooling.
3. Turn off the power supply when not in use!
Package Included:
1 × Electric Engraver
Note:
1.Transition: 1cm=10mm=0.39inch.
2. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
3. Please allow slight manual measurement deviation for the data.
Care
To maintain the beauty and integrity of your purchase, we recommend treating it with care. Simple maintenance practices, such as gentle washing and proper storage, can effectively preserve the longevity of your favorites. We encourage you to refer to the care instructions included with each item, designed to help you keep your purchase in top condition.
Design
Our dedication to excellence extends beyond materials; it encompasses the artistry and craftsmanship illustrated in every piece we create.